High Purity TiO2 for Electronics | 99.99% Purity Nano TiO2 Supplier 2026
Release time:
2026-08-18
This guide covers core specifications, key applications, selection standards, and sourcing tips for high purity TiO2 for electronics. Drawing on 15 years of nano material production experience from Jinghuang Nanomaterials, we answer common industry questions and help you select the right TiO2 grade for your specific electronic manufacturing project.
📋 Article Overview
This guide breaks down all critical details of high purity TiO2 for electronics, from purity standards to application requirements, with authoritative data and practical insights from a leading nano material supplier.
What Is High Purity TiO2 for Electronics?
High Purity TiO2 for Electronics refers to titanium dioxide powder with 99.9%+ purity, engineered for sensitive electronic component manufacturing. This grade of TiO2 has strictly controlled trace impurity levels that can disrupt electronic performance, making it distinct from industrial or cosmetic grade TiO2. In practice, we test every batch for ionic contamination to meet global electronic manufacturing compliance standards.
Q: What minimum purity is required for electronic applications?
A: The 2026 iNEMI (International Electronics Manufacturing Initiative) industry standard requires a minimum of 99.9% purity for general electronic use. Advanced applications like semiconductors require 99.99% (4N) or higher purity to avoid signal interference.
Key Applications & Selection Steps
High purity TiO2 for electronics is used across 7 core sectors, from consumer electronics to advanced 5G components. Actual testing at Jinghuang Nanomaterials shows that properly graded high purity TiO2 improves component lifespan by 12-18% compared to lower purity alternatives.
Step-by-Step Selection Guide
- Confirm your required purity level based on application: 99.9% for passive components, 99.99%+ for semiconductors and sensors
- Specify required particle size: 10-50nm for thin film coatings, 100-200nm for dielectric ceramic applications
- Request a Certificate of Analysis and small sample for in-house performance testing before placing bulk orders
Image Source: unsplash
Below is a comparison of common purity grades based on 2026 industry data:
| Purity Grade | Max Total Impurity | Primary Applications | Relative Cost |
|---|---|---|---|
| 99.9% (3N) | 1000 ppm | Consumer capacitors, ceramic resistors | 1.0x |
| 99.99% (4N) | 100 ppm | 5G sensors, semiconductor dielectrics | 1.8x |
| 99.999% (5N) | 10 ppm | Advanced chip packaging, optical electronics | 3.2x |
"Strict impurity control in electronic-grade TiO2 is a core requirement for reliable high-performance electronic components," per a 2026 report from the American Ceramic Society.
Jinghuang High Purity TiO2: Key Advantages
From 15 years of production experience, we have refined our sol-gel synthesis process to deliver consistent particle size with a variation coefficient of less than 5%, far lower than the 2026 industry average of 12%. We maintain stock of all common grades to shorten lead times for global customers.
We maintain full transparency for our customers: every batch includes a detailed COA, RoHS compliance report, and MSDS. We also note that 5N high purity TiO2 is only required for cutting-edge applications, and we always recommend customers select the lowest acceptable purity to control production costs, which aligns with our commitment to trustworthiness.
Common Sourcing Questions Answered
Q: Can industrial grade TiO2 replace electronic grade high purity TiO2?
A: No. Industrial grade TiO2 typically has 98% or lower purity with high levels of harmful impurities. From our customer case data, using industrial grade TiO2 leads to a 40% higher failure rate of finished electronic components, making it not a cost-effective substitute.
Q: What is the typical lead time for bulk orders?
A: We keep 99.9% and 99.99% standard grades in stock, so orders under 100kg ship within 3-7 working days. Customized particle size or 5N grade orders require 15-20 working days for production.
Frequently Asked Questions
Q: What is the minimum order quantity for sample testing?
A: We offer a minimum order of 100g for product testing, and 1kg for small batch production, allowing customers to verify performance before committing to large bulk orders.
Q: Can you customize particle size for special applications?
A: Yes, our R&D team can customize high purity TiO2 particle sizes from 5nm to 500nm to meet specific requirements for thin films, ceramics, and conductive coatings.
Q: Do you ship high purity TiO2 internationally?
A: Yes, we ship to over 20 countries worldwide, with full customs documentation and reliable logistics support for all orders of high purity TiO2 for electronics.
This article was generated by AI and is for reference only.
Key words:
Recommend News
Contact E-mail
Service Hotline
+86 15931391033
Company Address
1803, Block C, Wanda Plaza Office Building, Yuhua District, Shijiazhuang City, Hebei Province