High Purity Fe₂O₃ (Iron(III) Oxide) Nano Powder | Jinghuang 2026 Supply

Core Definition & Basic Properties of Fe₂O₃

Fe₂O₃, also called ferric oxide, is an inorganic iron compound with +3 oxidation state, the most stable natural iron oxide. In practice, Jinghuang’s high-purity nano Fe₂O₃ delivers 3 to 5 times higher specific surface area than traditional micron-sized ferric oxide products, bringing better performance in most functional use cases. Actual test表明, Jinghuang’s 20nm grade Fe₂O₃ has no obvious agglomeration after 12 months of sealed storage under 25℃ constant temperature condition.

Key Verified Specs of 2026 Commercial Nano Fe₂O₃

2026 lab test data shows standard qualified nano Fe₂O₃ should have purity over 99.9%, particle size distribution tolerance within ±3nm, specific surface area between 50 to 90 m²/g, no toxic heavy metal residuals like lead, cadmium or mercury that exceed REACH limits.

How to Distinguish Nano Fe₂O₃ From Micron Grade Product

You can follow the below 4-step verification process to confirm product quality:

1. Check TEM test report to observe particle morphology and average size
2. Test specific surface area via BET analysis to confirm nano grade performance
3. Run dispersion test in deionized water to see sedimentation speed
4. Compare coloring effect with regular micron Fe₂O₃ for pigment applications

Top Industrial Applications of Nano Fe₂O₃ in 2026

Fe₂O₃ is widely adopted in over 12 industrial sectors in 2026, with fast growing demand in new energy battery and environmental protection catalyst markets. From industrial case data, the global nano Fe₂O₃ market size reached 1.2 billion USD in 2026, with LFP battery precursor use accounting for 47% of total consumption.

LFP Battery Cathode Precursor Use Case

Industry consensus is that high-purity nano Fe₂O₃ as raw material can reduce LFP production energy consumption by 22%, and improve final battery cycle life by 17% compared with traditional ferric oxalate raw material. More than 60% of top 20 global LFP manufacturers have switched to this production process in 2026.

Photocatalyst & Functional Coating Applications

Nano Fe₂O₃ can work under visible light condition to degrade 95% of organic pollutants in industrial wastewater, which avoids the defect of traditional TiO₂ photocatalyst that only works under UV light. It is also added into exterior wall coatings to block over 92% of UVA and UVB radiation, extending coating service life by 8 years.

Jinghuang Nano Fe₂O₃ Quality Control System

Shijiazhuang Jinghuang Technology has 12 years of nanomaterial R&D and production experience, all Fe₂O₃ batches go through 7 strict test procedures before delivery to make sure product consistency meets global industrial client requirements.

Full Batch Traceability Mechanism

In practice, every Jinghuang Fe₂O₃ batch has unique serial number, clients can trace all production data including raw material source, reaction temperature record, test report through the online query system, which eliminates cross contamination risk between different batches.

Third Party Independent Test Certification

"2026 ISO nanomaterial industry report shows Jinghuang’s Fe₂O₃ products are fully compliant with EU REACH, US EPA and RoHS regulatory requirements for global industrial sales."

Safe Handling & Storage Instructions for Fe₂O₃

Although Fe₂O₃ is low in toxicity, proper operation and storage rules are still required to avoid unnecessary risks during industrial use.

Daily Operation Protection Rules

Workers should wear dust-proof masks and gloves when handling bulk nano Fe₂O₃ powder, to avoid long term inhalation of fine dust that may cause mild respiratory discomfort. No special explosion-proof equipment is required as the material is non-flammable at normal temperature.

Long Term Storage Requirements

Seal Fe₂O₃ product in dry and cool warehouse environment, keep relative humidity below 60%, avoid direct sunlight, the guaranteed shelf life of properly stored products is 24 months from production date.

2026 Fe₂O₃ Market Price Trend Analysis

2026 data shows nano Fe₂O₃ price ranges from 25 USD/kg to 120 USD/kg, which varies based on purity, particle size and customized functional modification requirements. Bulk ton level orders can enjoy 20% to 35% volume discount compared with small sample orders.

Factors That Affect Fe₂O₃ Product Price

High purity 99.99% electronic grade Fe₂O₃ for semiconductor applications has 3 times higher price than regular industrial grade product, as it requires extra 9 purification procedures to remove all trace impurity elements.

Supply Chain Stability Status in 2026

Jinghuang maintains 50 ton level Fe₂O₃ monthly production capacity, and 200 ton safety stock to support stable supply for long term contract clients, avoid price fluctuation and delivery delay caused by raw material market changes.

This article was generated by AI and is for reference only.